Grow Trays

Description

Trays are priced from $99 inc GST + shipping

Another one of the most critical components in successful hydroponic Fodder Growing systems is the growing tray.

Over the any years of growing Fodder we have tried all kinds of growing surfaces to try and get the system cost down and cut out the labour component.

After all of our trails we still continue to use a Minimum 3mm thick ABS Plastic Tray.

A DIY Fodder Tray is not just an ordinary Min 3mm thick ABS plastic tray.

Over many years we have made a lot of design improvements of the growing trays.

As you can see from the photos the tray are divided into sections that allow for east harvesting, rinsing and reseeding.

They are also shaped in a way that allows them to be pushed through the system, allowing for harvesting at one end and reseeding at the other end of the system.

A Key design feature is the CNC Routed Drainage slots in the trays. These drainage slots are crucial to growing s successful crop year round. The drainage slots wick excess water away from the root mat, but allow enough moisture to be retained in the root mat.

All of trays are made in Australia. We have tried importing trays from Various Countries, but the quality and longevity are just not there due to the raw ingredients used in the manufacturing process.  Some of the imported trays only last three months and then they start and deform and peel in layers. It is an expensive lesson to learn in purchasing poor quality trays.

We manufacture a universal sized tray. It measures 1065mm wide by 860mm deep. This means that it will fit in the conversion of shipping containers and truck bodies to Fodder Growing systems.